ECONOFOREST™

Cut sheet: Econoforest.pdf

Specifications

A general purpose forestry utility layflat hose, ECONOFOREST™ has a 100% filament polyester single jacket construction with TPU elastomer lining. this 3/4" (19 mm) hose is available with yellow ENCAP™ or untreated, coupled with Brass GHT and can be used for tasks such as filling pump cans, supplying sprinklers, mop-up etc. It has a service test pressure rating of 250 PSIG (1750 kPa), and can handle most common hose pressures, which could allow you to expand the possible ECONOFOREST™ applications.

Standard lengths: 50' and 100' (15,2 m and 30,5 m).

ECONOFOREST™ specifications

The hose shall be of single jacket construction with 100% virgin filament polyester.
There shall be a minimum of 10.0 filler yarns per inch in the jacket.
The thickness of the lining shall be 0.015" (381 µm) minimum and it shall be constructed of extruded T.P.U. elastomer.
If required (optional), the outside jacket shall be treated with yellow ENCAP elastomer, which shall completely encapsulate the jacket fibers and not merely surface coat the jacket.
The hose service temperature range shall be -60°F to 140°F (-51°C to 60°C).
FM abrasion test of 1,000 cycles minimum.
At 500 PSIG (3500 kPa), its elongation shall not exceed 8% of the initial hose length, it shall not warp more than 20 inches (51 cm) and should not rise from the test table.
The hose shall not twist more than 10 turns per 100 ft (30,5 m) while at 500 PSIG (3500 kPa).
Minimum service test pressure of 250 PSIG (1750 kPa).
Minimum proof test pressure of 500 PSIG (3500 kPa).
Minimum straight burst test pressure of 750 PSIG (5200 kPa).
The hose while curved to a radius of 27" (69 cm) shall not burst at less than 750 PSIG (5200 kPa).
Meets or exceeds UL-19 and NFPA 1961 specifications.

Physical properties

Spec Number	Hose Size	Coupling bowl size	Weight per 50 ft	Coil Diameter per 50 ft	Minimum Kink Burst Test Pressure
2207	3/4" (19 mm)	3/4" GHT (19 mm)	5.5 lbs (2.5 kg)	8" (20 cm)	500 PSIG (3500 kPa)