STAFLO®

A 100% filament polyester, TPU elastomer lined weeping forestry layflat hose, Lightweight, easily packed, and handled. The weepage rate is 11.8 to 18.6 oz/ft/minute at 100 PSIG (350-550 ml/0.3m/minute at 700 kPa). This single jacket forestry hose meets or exceeds ULC S-519.1. in the 1 1/2" (38 mm) size.

Standard lengths:  50 and 100' (15,2 and 30,5 m)

• The hose shall be a single jacket construction with 100% virgin filament polyester.
• There shall be a minimum of 11.0 filler yarns per inch in the jacket.
• The thickness of the lining shall be 0.015" (381 µm) minimum and it shall be constructed of extruded T.P.U. elastomer.
• The hose service temperature range shall be -60°F to 140°F (-51°C to 60°C).
• FM abrasion test of 1,000 cycles minimum.
• At 300 PSIG (2100 kPa), its elongation shall not exceed 6% of the initial hose length, it shall not warp more than 20 inches (51 cm) and should not rise from the test table.
• The hose shall not twist more than 10 turns per 100 ft (30,5 m) while at 300 PSIG (2100 kPa).
• Minimum service test pressure of 150 PSIG (1050 kPa).
• Minimum proof test pressure of 300 PSIG (2100 kPa).
• Minimum straight burst test pressure of 900 PSIG (6300 kPa).
• The hose while curved to a radius of 27" (69 cm) shall not burst at less than 900 PSIG (6300 kPa).
• The leakage shall be consistent and uniform throughout the length of the hose. The leakage rate per 1 foot  of hose at 250 PSIG (1750 kPa) shall be 0.68 oz/ft/min (66 ml/m/min) for the 1" (25 mm) and 1.03 oz/ft/min (100 ml/m/min) for the 1 1/2" (38mm).
• Meets or exceeds ULC S-519.1-95 specification.