CDHT1500SS

CDHT1500SS

The stainless steel cart and manifold remain rust free for life with minimum maintenance. We recommend the use of Brass check valves to avoid corrosion when used in salt or brackish water environment. Our unique fully automatic check valve system reduces labor and enhances safety.

STANDARD FEATURES OF THE CDHT1500SS INCLUDE:

• 1 x 1 ½” (38mm) NST or NPSH Swivel Female inlet connector (thread type to be confirmed when ordering)
• 4 x 1 ½” (38mm) NST or NPSH Fully automatic aluminum check valve system outlets (thread type to be confirmed when ordering)
• ALL STAINLESS 1 ½” (38mm) manifold
• ALL STAINLESS Low Profile Cart with 4 wheels
• Powerful 1.7 HP Industrial motor – CSA approved
• Electrical connection: 110/120 Volt AC
• Large 3.2 GPM (12,6 L) OIL BATH PUMP, complete with thermal protective valve
• Delivers up to 500 PSI (3447 kPa) pressure and a 3 GPM flow rate
• In-line filter included on all models
• Complies with NFPA standards

OPTIONS:

• Check valve assemblies available in brass
(w/Brass Check Valves: ADD 6 Lbs. total to below weights)
• Pressure washer assembly – includes spray
gun, wand, HI/LO pressure spray nozzle
& 60 ft. of hose
• Liquid injector used for soap applications with
pressure washer assembly.
• Aluminum Adapters for all coupling sizes
and thread patterns (subject to change without notice)
• 50 Hz Motor
• 240V Wiring with required Plug

Physical properties

Niedner

Part #

Thread

Cart type

Tester dimensions

( W x L x H )

Crated

Dimensions

( W x L x H )

Weight

Tester only

 

Weight

Crated

CDHT1500SS

NST

Low Profile

20” x 17” x 20 ¼”

(cm: 51 x 43 x 52)

27” x 24” x 23”

(cm: 69 x 61 x 59)

92 Lbs.

(41,7 Kgs.)

125 Lbs.

(57 Kgs.)

CDHT1500SSA

NPSH

Pumpkin Center Volunteer Fire Department


At Pumpkin Center VFD, we strive to give our members quality equipment to use at all times. We’ve found over the years that small details make huge differences. Our equipment committee is always asking the question “Is something better out there?” We stay abreast of current industry trends and investigate the latest and greatest from equipment manufacturers to make sure our guys and girls have what they need to do the job and do it well. In 2009 we were tired of the fire hose we had been purchasing and bought some Niedner XL-800. The hose is still in service today. During this time we’ve found that in addition to being durable, it rolls up extremely tightly, packs tightly in hose beds and is lightweight, which lessens fatigue on members. With a comparable friction loss rate to much other hose in the industry, our committee has yet to find a reason to leave Niedner. We had several sections of cloth Niedner 4 inch supply hose before switching to 5 inch as well. It was the best supply hose I’ve ever seen or used.

 

Casey Snyder, Assistant Chief, Pumpkin Center Volunteer Fire Department